Switchplates were the March 2008 theme for my Out of the Box creativity challenge. I took some in progress photos but not a full-blown tutorial. I even forgot to take a stylized photo of the one I traded that night, very unlike me! Fortunately making these are extremely addictive so I had plenty more for that purpose. Guess which is Leil’s and which is Caitlin’s?
Feel free to ask questions about missing steps.
I used a standard white plastic switchplate for the base, Yes! paste and Mod Podge Gloss Lustre. I started off trying to use Mod Podge as both the adhesive to attach the fabric and as the top coat. Everything slipped around so I changed to Yes! paste for attaching the fabric. It provided just the right amount of tack to keep things in place.
The other construction element I experimented with was the center hole. I tried cutting a slot in the fabric and bending back the wings to paste them to the backside, a standard technique when using paper or contact paper. I wasn’t satisfied with this technique for fabric. The fibers tended to fray and it was difficult to get the tiny bits of fabric to hold well. I made a simple facing for the hole and was very pleased with the tidiness of the final result.
To make a facing:
Punch some holes for the screws:
The missing steps:
- push the facing fabric through the switchplate hole, bring all the seam allowances to the back, use Yes! paste to glue it all down
- brush the front of the plate with Yes! paste and smooth the fabric down
- turn back the corners and slather with paste to get them to stay in place (see final photo of switchplate back to get an idea of how I did mine)
- apply a good thick layer of Mod Podge to the whole thing
- try to be patient while it dries, start unscrewing every switchplate in the house
Finished switchplate now residing in my friend Margret’s home (I sure like the fabric on this one! the feedsack fibers gave it a fabulous texture):
Back sides of finished plates:
cute! Thanks for the tute. I will have to make one to match my dd’s room.
HAHAHA! I love it!! I have now seen a bound buttonhole on a switch plate. I must show this to all my sewing friends!!!
This idea and tutorial is fantastic. Thanks so much!
- Jen (sewandsox)
My thought too–a bound buttonhole! The switchplates are pretty darn cute. Great idea.
You’re killing me with the faced switch area. You’re a genius! Love it.
They’re very pretty! When I was a little girl I remember my mother always searching for cute switchplates for our rooms. Too bad she didn’t come across this idea. She would have been hooked!
OK, that looks like the most fun and addictive project ever. I actually work for a company that makes switch plates, so the temptation will be staring me in the face until I succumb.
Your covers turned out way cute. What a good idea. Thanks for sharing.
I find covering switch plates with fabric too hard and fussy for me (lazy!) so I photocopy my fabric onto plain printer paper and use that to glue onto the switch plates. I copied my bedsheets to make matching switch plates in the bedroom.
Pretty Slick— I just love these.
Those out of the box things are so fun! I love the switch plates.
what an excellent idea! I will definitely have to try this out around our house to spruce up some boring white light plates. : )
Oh. My. I had no idea you could do this. Never thought about it once. I can’t wait until we have a home to redecorate!!
So cool!
Where’d you get the awesome ladybug fabric?
Wow, I love it! I might have to upgrade my own switch plate on my room…
What a neat idea! Inexpensive, unique, and wonderful!
Absolutely darling! I think I’m going to have to make one for my husband using his favorite spongebob fabric— so much cheaper than trying to buy one that actually looks good.
Wow, just in case I was getting low on the house projects, along comes this!! Too cool, definitely on the list.
so cute, kathy! thanks for the tips.
I LOVE covered, funky switchplates!! I have as many of them in the house as I can find..but now I can use all that fabric I have to cover some of them. Very nice tute! thank you so much for spelling it out.
Gorgeous idea – love it!
Out with generic and in with unique! Major wow factor! You are one creative cookie—thanks so much for sharing. I’m redoing the kids’ BR, and I see a gnome switchplate in the near future. . .
wish you had done this months ago! i did the hole for the switch the hard way! pulled it tight though so it would look neat! good job!
those look pretty cool!
love the one with the bugs ^-^ … though the polka dotted one is also very cute… i couldn’t decide which one i like better.
too bad we don’t have those switchplates here. the lightswitches over here look completely different, but it might be fun to try to re-do them!
Jane: The ladybugs are an Alexander Henry fabric called Juicy Jungle Blooms. I ordered it from Hanococks of Paducah:
http://www.hancocks-paducah.com/Item–i-AH-8039-A
Oh what i cute idea. I will definatley have to try this soon.
Could you explain how you did the facing part? I don’t understand the pictures and I feel like the biggest dork, but I want to do one of these
Thanks!
*headsmack*
I just figured it out – I didn’t notice which sides were right and which were wrong. I got it now. Just had to look at the photos a few more times
Off to the hardware store for switchplates!!!
Just found you via the Craft: blog. I have to say that the facing idea is *brilliant!* Makes me want to go back and re-do all the ones I’ve done. Well, maybe not.
But going forward, I am definitely doing this — thanks for sharing!
I love them. I have got to make one for each of my kids. Thaks for the instructions
I love this idea….great tutorial too! My grand kids would like these for their rooms….what am I talking about I want some for my rooms….lol! Thanks for sharing.
I think you need a TV show! Lovely as usual.
What a cool idea. Going to do up a funky design for my daughter’s room.
This is pretty but I’m very concerned that this is a fire hazard.
Wow! What a great idea! I love it!
[...] clipped from pinkchalkstudio.com [...]
To respond to Denise’s concern (which concerns me too!):
I did a lot of web surfing to try and research this issue. In general, I did not find anything conclusive on the safety of modifying a switch plate. I read a few threads on electrical forums. Most related to questions of wallpapering a switch plate. There did not seem to be a feeling that this was dangerous. It did seem that many were against it because by modifying a UL rated item (the switch plate) the contractor’s work may not pass inspection.
I’m going to continue researching the issue. If you have information about this please e-mail me.
One thing I did find were insulting foam layers for switch plates:
http://www.amazon.com/Thermwell-OSS6H-White-Plate-Sealer/dp/B000F5IAVG/ref=pd_sim_hi_title_1
This would provide a layer between the actual switch plate and the electrical box.
One more bit of info on the safety concerns. Mod Podge is a non-flammable product.
How fun. I’ve been doing this with wallpaper for years. Will have to try fabric.
[...] Today’s feature is from Pink Chalk Studio with a tutorial for Covering Switchplates With Fabric: I used a standard white plastic switchplate for the base, Yes! paste and Mod Podge Gloss Lustre. I started off trying to use Mod Podge as both the adhesive to attach the fabric and as the top coat. Everything slipped around so I changed to Yes! paste for attaching the fabric. It provided just the right amount of tack to keep things in place. [...]
This is wonderful! I love it. Thanks for your sweet reply to my note and for coming by my blog. I would like to feature you sometime in the next week. If you are interested, please send me a couple of photos that you would like to show. I prefer 500 pixels with a 72 dpi if possible. You have so many wonderful goodies here. This is a great place to visit.
Wishing you a great Thursday.
Cookie
Lovely idea, is there any product you know off which would make them cleanable? In our house switch plates always seem to get grubby.
I would like to mention this on my blog. Could I use your top image? Oh, you said you changed the paste under. Did you still Mod Podge over the top?
Sally: I did a little research. I didn’t turn up any specific products but I saw a lot of people stating they used a ‘waterproof acrylic sealer’ on their custom switch plates. Hope this helps!
[...] A photo tutorial that Kathy Mack put on her blog Pink Chalk Studio got me thinking about a way that I could do the inside “holes” in the letter. Kathy’s tutorial is for covering switch-plates, (the cover around the light switch). Decorative switch-plates is not something that you see much of in Australia, although my Brother-in-law and Sister-in-Law just bought a house with ceramic, hand-painted, floral switch-plates. Perhaps it is a trend that is yet to come? [...]
This is a great idea, Kathy! Thanks for sharing! Happy Days to you & yours
)
Kathy Your idea on fabric covered switch plates is a grand idea, I would never have thought of it. Think of all the possibilities that can be done with them. Love and Hugs Dianne
LOVE this tutorial. I’ve been a lot more interested in the switchplates in my house since seeing this. I’m adding this to my tutorial list for sure!!!
I do love these switchplates. I have to say they are even better in person!
I really liked this idea, and tried it out on three switchplates today. However, I found that the facing adds bulk to the inside hole where the switch or outlet goes, and I couldn’t fit my switchplate covers back on properly with the facing. I ended up just taking the facing off